The Correct Procedure for Cleaning a Residential Well

If you own a water well, you are probably aware that you should conduct regular maintenance on your water well for it to work right. Expert welldrillers warns that failure to do regular maintenance compromises the state of your well and the quality of your water.

You should schedule at least a well inspection yearly. Nevertheless, it is important to clean your well in between the inspection visits. Cleaning your well keeps the micro-organisms in water at bay and maintains the quality of your well water.

Below are the subsequent steps useful in cleaning a well:

Chlorine Addition

The first step in cleaning your well is adding chlorine to the water. Wear gloves and pour the chemical into the well for safety. A gallon of chlorine is sufficient to do the task. You can also use bleach in the place of chlorine.

Ensure that the bleach circulates through the whole system. You can run water in the well to know whether the bleach has reached all parts of the well system.

Cleaning the Aquifer

Take all the water from the previous step and pour it into the well as fast as possible. The water level in the well will increase, and the excess will flow into the aquifer, and therefore clean the aquifer automatically.

The Chemical should then turn off the system and let it rest for at least eight hours. The resting time gives the chemical sufficient time to work. After the system has been in a resting position for a while, you need to flush out the chemicals.

Run the outdoor faucets for long until you cannot smell the chemical in the water. You can then turn off the faucets and start using a clean well system.

Besides scheduling well inspection and maintenance with your welldriller, cleaning your well is important to maintain the quality of your water. You also avoid having to deal with replacing your well parts and increase the lifespan of your well.